Fire Investigations - Adding a Contact from Occupancy Contacts
Purpose
- The purpose of this Knowledge Based Article is to demonstrate how to add a Contact from Occupancy Contacts
Related Articles
Video
Instructions
1. Click on Fire Investigation.
2. Click on Investigations List.
3. Click on Add Fire Investigation.
4. Click on Investigation Number.
- Enter the required Investigation Number
5. Click on Address Line 1.
- Start typing the address and addresses will begin to appear from the Occupancy data
- Click on the correct Occupancy to be used
6. Click on Persons Involved.
7. Click on the arrow down icon.
8. Click on Add from Occupancy.
9. Choose the Occupancy Contact to be used.
10. Click on Add to Investigation.
11. The Occupancy Contact will now show in the Persons Involved column.
Related Articles
Pre-Plans: Managing Contacts
Purpose To demonstrate how to manage and add contact information when completing a Pre-Plan. Video Directions 1. Access the desired Pre-plan to edit. 2. Once in edit mode for a Pre-Plan, select the Contacts tab. 3. Enter the Property Ownership type ...Adding and Updating Contacts and Adding Addendum in Previously Completed Inspections
Purpose To explain how add and update contacts and add addendums to previously completed inspections. Video Directions 1. Click on Inspections> Inspections List. 2. Select the eye to view a completed inspections report. 3. From here we can add and ...Fire Investigations - Investigations Resources
Purpose The purpose of this article is to direct the First Due users on how to add Investigations Resources in the Fire Investigations module. Video Directions 1. Navigate to the Fire Investigation Module 2. Select Investigations List 3. Select the ...Setting up the ePCR - EMS Contacts
Purpose To explain how to enter the data elements of EMS Contacts section of your EMS Setup and to define those data elements. Related Articles Setting up the ePCR - Demographics Setting up the ePCR - EMS Contacts (this article) Setting up the ePCR - ...Managing the Occupancy Record
Purpose To demonstrate navigating through and updating the Occupancy Record. Related Articles Editing Occupancy Address Video Instructions 1. Click on Inspections. 2. Click on Inspection Organizer. 3. Select an inspection type and then change. 4. ...