Placing Equipment and Kits In or Out of Service with Apparatus

Placing Equipment and Kits In or Out of Service with Apparatus

Purpose

The purpose of this article is to demonstrate how to place Equipment or Kits located in Apparatus Compartments In or Out of Service at the same time as placing the Apparatus In or Out of SErvice.


Related Articles

Swapping Equipment When an Apparatus is Placed Out of Service


Video



Instruction


1. From within the Assets Module, Click on Apparatus Checks.


From within the Assets Module, Click on Apparatus Checks.



2. Apparatus may be placed In or Out of Service from the Fleet Overview or from inside that apparatus' overview record as shown in Step 4.






3. Select the apparatus that is to be placed Out of or back In-Service.


Click on Engine 1



4. Select the toggle to place the Apparatus In or Out of Service


Select the toggle to place the Apparatus Out of Service



5. Select whether to Swap, Relocate or Update Status Only.

More information can be found on swapping/relocating Equipment and Inventory in the related article:  






The steps below will show up immediately selecting "Updates Status Only" or after performing the functions of Swap or Relocate.




8. Note the nomenclature below. Simply put, leaving the toggles ON will also place the listed Equipment and Kits Out of Service, matching the apparatus status.


Note the nomenclature below.  Simply put, leaving the toggles ON will also place the listed Equipment and Kits Out of Service, matching the apparatus status



9. For this example, we will leave the toggle for Equipment On and turn off the toggle for Kits.


For this example, we will leave the toggle for Equipment On, and turn off the toggle for Kits.



10. Click on Save


Click on Save



The screenshot below shows that the SCBA included in the Equipment for which we left the toggle on, was placed Out of Service with the Apparatus whereas the Kit for which we turned the toggle off was left In-Service.


Here we can see that the SCBA included in the Equipment for which we left the toggle on, was placed Out of Service with the Apparatus whereas the Kit for which we turned the toggle off was left In-Service.






    • Related Articles

    • Swapping Equipment When An Apparatus is Placed Out of Service

      Purpose The purpose of this article is to inform users how to utilize First Due's swap feature to relocate equipment when an apparatus is placed out of service. Idea: The apparatus swap feature is a useful tool to allow users to relocate equipment ...
    • Equipment: Navigating the Equipment Overview Screen for a Specific Asset

      Purpose The purpose of this article is to inform users how to navigate the Equipment Overview for a specific asset in the First Due system. The Equipment Overview screen allows users to easily view and manage information pertaining to a specific ...
    • Kits: Navigating the Kits Overview Screen

      Purpose The purpose of this article is to inform users how to navigate the Kits Overview in the First Due system. The Kits Overview screen allows users to easily identify checks that are due, view the number of work orders for each of the ...
    • Equipment List: Import Wizard

      Purpose The purpose of this article is to inform users how to bulk import equipment into the First Due System using First Due's Bulk Import Wizard. The Template CSV file is attached to the bottom of this article. Info: The Bulk Import Wizard allows ...
    • Apparatus: Navigating the Apparatus Overview Screen

      Purpose The purpose of this article is to inform users how to navigate the Apparatus Overview in the First Due system. The Apparatus Overview screen allows users to easily view and manage information pertaining to a specific apparatus. Video ...