Form Builder - Delimiter

Form Builder - Delimiter

Purpose

  1. The purpose of this Knowledge Base Article is demonstrate how to add a delimiter using the Form Builder.
  2. These instructions apply to the delimiter in Form Builder for the following Modules: Inspections, Permits, and Fire Investigation.

Video


Instructions


1. Create a form or select edit to edit an exiting form.





2. When adding blocks to a form, it may be necessary to add a delimiter between the blocks to create a space between them.  Form without a delimiter between the blocks:






3. To add delimiter, mouse over the left margin at a current block to locate the + sign and select it then select delimiter.






4. When adding a delimiter, it looks like this in the form:






5. Form after adding the delimiter between blocks:






    • Related Articles

    • Fire Investigations - Form Builder Initial Instructions

      Purpose The purpose of this Knowledge Base Article is to provide initial instructions on how to create a printable Form in the Fire Investigations Form Builder List. Related Articles Inspections - Form Builder Basics Inspections - Form Builder ...

    • Form Builder - Delimiter

      Purpose The purpose of this Knowledge Base Article is demonstrate how to add a delimiter using the Form Builder. These instructions apply to the delimiter in Form Builder for the following Modules: Inspections, Permits, and Fire Investigation. Video ...

    • Form Builder - Delimiter

      Purpose The purpose of this Knowledge Base Article is demonstrate how to add a delimiter using the Form Builder. These instructions apply to the delimiter in Form Builder for the following Modules: Inspections, Permits, and Fire Investigation. Video ...

    • Form Builder - Delimiter

      Purpose The purpose of this Knowledge Base Article is demonstrate how to add a delimiter using the Form Builder. These instructions apply to the delimiter in Form Builder for the following Modules: Inspections, Permits, Invoicing, and Fire ...

    • Inspections: Adding US Mailing Address to Inspection Form

      Purpose To learn how to add a business address to an inspection form to allow use of a standard #10 Window Envelope to mail an Inspection Report via the United States Postal Service. Related Articles Form Builder Basics Form Builder Management Video ...