Web Responder: Station View

Web Responder: Station View

Purpose

  1. To explain the setup and functionality of a Station View.  Station View provides a "First Due Station Monitor" that can be set up as a static display that scans through incident details or displays new incident information as it becomes available.

NOTE: Station View is only available in Responder V2.


Helpful link

  1. Web Responder V2

Video




Directions


Setup

1. Go to: Response > Responder Setup > Station View



2. From Station View menu:



A - Check the box: Enable station view in responder

B - Choose between:

- Auto-rotate through incidents - This selection begins at the incident list and then displays the most recent incident information on the sidebar and zooms the map to the incident location.  After 15 seconds, the sidebar goes back to the incident list for 5 seconds and then proceeds to display the next most current incident.  If a new incident comes in, the system will display that incident and zoom to that location on the map.

- Always display most recent incident - This selection begins at the incident list and then displays the most recent incident information on the sidebar and zooms the map to the incident location.  This display will maintain in place until a new incident comes in.  At that point, the new incident details and map will display.




Using


1. Ensure you are in the Responder View.






2. On the bottom-left of the screen, select Responder V2.




3. If it is not already open, open the Incident List




4. Your selected "Station View" is now active.

    • Related Articles

    • Web Responder: Web Responder V2

      Purpose In response to user input for a more enhanced experience on the web side of Responder to more closely match our popular Mobile Responder App, First Due is proud to reveal Responder V2 with Station View. This KBA will demonstrate the ...

    • Web Responder: Google Map Features

      Purpose To give an overview of the Responder view when using Google. Video Overview From the Response module within the Responder View. Google can be displayed in Map view. Or displayed in Satellite view. When in Satellite view the map can be tilted ...

    • Web Responder: ArcGIS Features

      Purpose To give an overview of using the ArcGIS map in the Responder view. Video Overview From the Response module select the Responder view. Click on ArcGIS. Click to toggle the green address icons on/off. Note: You are able to access an Address' ...

    • Web Responder: Overall

      Purpose To explain the features of the Incident toolbar within the Responder view. Video Features 1. From the Response module select Responder view. 2. Click the dispatch bell to display or hide the calls. 3. Toggle All Calls to alternate between ...

    • Web Responder: Responder Status Setup

      Purpose To explain how to setup the Responder Status mapping buttons (if applicable). Video Directions 1. Navigate to Response module. 2. Click on Setup. 3. Select the Responder Status tab. 4. From the Responder Status dropdown you can select what ...