Starting a Command Board from the Response Map
Purpose
- To explain how to start a Command Board from the Response Map.
Video
Directions
1. Find the incident icon that you wish to use the command board for.
2. Click on Incident Command.
3. You will land on the Command Board, and can begin documenting the incident.
Related Articles
Command: Map Section
Purpose To give a overview of the Map Tab on the Command Board. Video Directions 1. The map functions similarly to that of pre-planning. The Pencil icon allows for annotations to be drawn on the map. The house allows for primary addresses to be ...Web Responder: Google Map Features
Purpose To give an overview of the Responder view when using Google. Video Overview From the Response module within the Responder View. Google can be displayed in Map view. Or displayed in Satellite view. When in Satellite view the map can be tilted ...Inspections Map
Purpose To demonstrate navigating and using the Inspection Map Video Instructions 1. Click on Inspections. 2. Click on Inspections List. 3. As an alternative, click on My Inspections. Note that the only inspections on this page are those assigned to ...Command: Initiating or Joining an Incident Command
Purpose To explain how to initiate or join a Command Board from Mobile or Web. Video Directions 1. In Mobile, select Incidents. 2. Then select an incident from the incident list. 3. Scroll down in the incident information window to access the Take ...Command: Board Section
Purpose To provide an overview of the Board Section in the Command Module. Video Directions 1. The Board Section is split into 3 areas: Command Staff Unassigned Units Assignments 2. The Command Staff Section is configured in Command Setup. Units can ...