Methods on starting a Service or Flow Test of a Hydrant
Purpose
- To demonstrate the different locations to start a Service or Flow Test of a Hydrant within First Due.
Video
Directions
1. From the Hydrants List:
- Using the advance search to filter the list or from saved views, from the actions columns select the icon to service or flow test.
2. Using the map icon from the Hydrant List.
The map marker indicates hydrant locations.
Selecting on the marker will allow to begin a Service or Flow Test.
3. From the Pre-Planning module withing the Pre-Plans Map selecting on a hydrant will allow to Service or Flow Test.
4. From the Response module within the Responder View, selecting on a hydrant allows to Service or Flow Test.
The mobile responder view will not allow to Service or Flow Test from the map, this is only capable from the web responder view.
Related Articles
Hydrant Setup: Flow & Service
Purpose Statement This article outlines how administrators can configure default settings for hydrant flow testing and service status within the Hydrant module. These defaults streamline data entry, ensure consistency, and support operational ...Documenting Hydrant Flow Testing
Purpose To explain how to document Hydrant Flow Testing. We recommend reviewing NFPA 291 - Recommended Practice for Fire Flow Testing and Marking of Hydrants to familiarize yourself with flow testing guidelines. Video Directions Navigate to Hydrants ...Completing a Hydrant Service Checklist
Purpose To explain how to complete a Hydrant Service Checklist. IMPORTANT: Failing checklist options will not be sent to any user within the First Due system. It is imperative that if an item is marked failing, a email be sent to the appropriate ...Calculate Needed Fire Flow
Purpose The purpose of this Knowledge Base Article is to demonstrate the process for calculating the Needed Fire Flow for an Occupancy. Video Instructions 1. Navigate to Admin then click on Roles. 2. Select edit for the Role to enable "Calculate ...Calculate Needed Fire Flow
Purpose The purpose of this Knowledge Base Article is to demonstrate the process for calculating the Needed Fire Flow for an Occupancy. Video Instructions 1. Navigate to Admin then click on Roles. 2. Select edit for the Role to enable "Calculate ...