Exposure Setup - Navigating and Adding Exposure Types

Exposure Setup - Navigating and Adding Exposure Types

Purpose

  1. The purpose of this article is to give an overview of the Exposure Setup along with adding custom Exposure Types.

Video



Information

  1. Only personnel with the proper permission will be able to create or edit Exposure Setup.
  2. There are four default Exposure Types that create additional tabs when documenting Exposures:
    1. Traumatic
    2. Physical
    3. Biological
    4. Chemical
  3. There will be enhancements to this module at a later time that when creating custom Exposure Types will create an additional tab allowing you to gather further information on the custom exposure type.
Warning
It is important to know if you delete any of the four default Exposure Types this deletes them permanently and you are not able to recover them.

Directions


1. Navigate to the Health & Wellness module then select on Exposure Setup.


Navigate to the Health & Wellness module then select on Exposure Setup.



2. From the Exposures Setup selecting the three bar stack will maximize your screen space.


From the Exposures Setup selecting the three bar stack will maximize your screen space.



3. Columns can be rearranged and sorted.

  1. Rearrange by dragging columns.
  2. Sort by selecting on column header.


Columns can be rearranged and sorted.



4. You can choose how many Exposure Types to display on the screen by 20, 50 or 100.


You can choose how many Exposure Types to display on the screen by 20, 50 or 100.



5. From the Actions column you are able to edit an Exposure Type by selecting on the pencil icon.


From the Actions column you are able to edit an Exposure Type by selecting on the pencil icon.



6. From the Edit Exposure Type modal you are able to edit the Code along with the Name then select Save.


From the Edit Exposure Type modal you are able to edit the Code along with the Name then select Save.



7. To delete Exposure Types can be done in two ways, the first is by selecting the trash can icon from the Actions column.


To delete Exposure Types can be done in two ways, the first is by selecting the trash can icon from the Actions column.



8. The second way to delete Exposure Types is in bulk, select the check boxes next to the Exposure Types you wish to delete then select on the Trash can icon next to the + Add.





9. Once selecting the Trash can icon will bring up a warning modal before deleting.


Once selecting the Trash can icon will bring up a warning modal before deleting.



10. After selecting Delete in the warning modal a message may appear, indicating that if Exposure Types are in use and they are not able to be deleted.


After selecting Delete in the warning modal a message may appear, indicating that if Exposure Types are in use then they can't be deleted.



11. To begin creating custom Exposure Types select on the + Add.





12. From the Add Exposure Type modal enter the Code and Name which are required fields to create Exposure Types then select Save.


From the Add Exposure Type modal enter the Code and Name which are required fields to create Exposure Types then select Save.



13. Selecting on the First Due logo will populate your module stacks.


Selecting on the First Due logo will populate your module stacks.



14. Now you can navigate to other modules along with their subsections.


Now you can navigate to other modules along with their subsections.


    • Related Articles

    • Documenting an Exposure - Information Section

      Purpose The purpose of this article is to explain and demonstrate the Information section when completing an Exposure. Video Directions 1. When documenting an Exposure select on the Information section. 2. There are three required fields when ...

    • Apparatus List - Creating Custom Views

      Purpose The purpose of this article is to demonstrate how to create Custom Views for the Apparatus List. Related Articles Apparatus List: Navigating the Apparatus List Video Instruction 1. Select Apparatus List within the Assets module. 2. Click on ...

    • Apparatus List - Creating Custom Views

      Purpose The purpose of this article is to demonstrate how to create Custom Views for the Apparatus List. Related Articles Apparatus List: Navigating the Apparatus List Video Instruction 1. Select Apparatus List within the Assets module. 2. Click on ...

    • Kit List - Creating Custom Views

      Purpose The purpose of this article is to demonstrate how to create Custom Views for the Kit List. Related Articles Kit List: Navigating the Kit List Video Instruction 1. Select Kit List within the Assets module. 2. Click on the Ellipsis next to the ...

    • Inventory List: Creating Custom Inventory Views

      Purpose The purpose of this article is to demonstrate how to create Custom Views for the Inventory List. Related Articles Inventory List: Navigating the Inventory List Video Instruction 1. Select Inventory Management within the Assets module... 2. ...