Command: Assignments

Command: Assignments

Purpose

  1. To explain how to transfer and assume command of a Command Board.  

Video 


Directions

1.  Assignment are tracked at the top of the assignment area. A ratio of open completed to open assignments is displayed and updated as assignments are added, deleted and completed.

2.  Assignments are arranged within the assignment area as configured in Command Setup. However, assignments can be reordered as needed.






3.  Each Assignments has an individual timer that starts when the first unit is placed into the assignment. This timer continues until the assignment is deleted or completed. A threshold time limit can be designated in Command Setup.
3A.  The timer will be highlighted in grey if the timer has not reached it's designated threshold time or does not have a designated threshold time.
3B.  The timer will be highlighted in Yellow when it is within one (1) minute of its designated threshold time.
3C.  The timer will be highlighted in RED when it has past its designated threshold time. It will stay highlighted in RED until it is marked complete.
3D.  The timer can be reset by selecting the reset button.




4. When a Unit is placed into an assignment the Unit's timer will start and be independent from the assignment timer. If the unit is moved to another assignment the Units timer will start over.






5. When Units are placed in an Assignment, the Unit menu gains the additional Menu feature of Make Lead. This allows the Unit within the Assignment on the Command board to be designated as the Lead Unit for that Assignment. It also places a Blue banner across the Unit to designate the unit as the Lead Unit of that Assignment. Only one unit per Assignment can be made the lead but can be changed between units at will.






6. To edit an Assignment, select edit from the Assignment Menu, make the desired changes and select Save.






7. To delete an Assignment, select delete from the Assignment Menu and the select Confirm. 






8. To complete an Assignment, select complete from the Assignment Menu and the following actions will occur.
  1. 8A.  Confirmation of the Assignment completion will appear at the Top.
  2. 8B.  Assignment Ratio will change to reflect a completed assignment.
  3. 8C.  Any Units that were in the Assignment will be returned to the Unassigned Units Area.
  4. 8D.  A green Checkmark will appear within the Assignment and the timer will stop. After a few moments the completed assignment will be removed from the Assignment area.






9. To view the Log History of the Assignment, select Log History from the Assignment Menu. The Log Section will then open into a filtered view for that Assignments Log Entries.






10. To duplicate an Assignment, select duplicate from the Assignment menu, and the duplicate Assignment will appear within the Assignment area.






11. To Add Notes to an Assignment, select Add Notes from the Assignment menu, enter the desired information and select Create.






12. Add Assignment, allows the user to create additional Assignment chosen from a list or a custom Assignment.






13. Complete All will mark all Assignments as complete, and all the same actions when completing an Assignment (8-8D) will occur for each Assignment.






14. When Units are placed in an Assignment, the Unit menu gains the additional Menu feature of Make Lead. This allows the Unit within the Assignment on the Command board to be designated as the Lead Unit for that Assignment. It also places a Blue banner across the Unit to designate the unit as the Lead Unit of that Assignment. Only one unit per Assignment can be made the lead but can be changed between units at will.






15.  The PAR timer is displayed in the center of the Board section and is set in Command Setup. The following features apply to the PAR Timer:
15A.  Current PAR Time
15B.  PAR Time Threshold (Limit)
15C.  Reset Par Timer






16.  When PAR Timer reaches 1 minute before PAR Time threshold the timer will Turn YELLOW.






17. When the PAR Timer reaches the PAR Time Threshold, the timer will turn RED and stop & remain RED until the timer is reset.



    • Related Articles

    • Validating Assignments

      Purpose To explain how to validate Assignments on the Shift Board. Validating assignments after completing shifts ensures accurate payroll information and prevents any changes being made. This process directly impacts the Payroll Report (Reports > ...

    • Command: Units

      Purpose To demonstrate an overview of Units on within the Command Board. Video Directions 1. Unassigned Units displays all the Units tied to this incident that are not currently assigned. Initially this is populated with only the dispatched Units but ...

    • Command: MAYDAY

      Purpose To provide an overview of the MAYDAY Activation feature in the Command Module. Video Directions 1. The MAYDAY feature is activated by pressing the MAYDAY button: 2. When MAYDAY is activated, a popup window will appear displaying: 2A. Search ...

    • Release Notes - Command Module

      In order to provide you with more detailed information on our updates we have broken the Release Notes down by module. New Features None Feature Enhancements Enhanced Command Assignment Management What: Assignments now have enhanced timers and ...

    • Command: Board Section

      Purpose To provide an overview of the Board Section in the Command Module. Video Directions 1. The Board Section is split into 3 areas: Command Staff Unassigned Units Assignments 2. The Command Staff Section is configured in Command Setup. Units can ...